Product Introduce
Item | Module | Head cover |
Clamp | Module Clamp |
Coupling Set |
Blind | Saddle | Air Blind |
---|---|---|---|---|---|---|---|---|
Quantity | 1 | 1 | 2 | 2 | 3 | 3 | 2 | 1 |
Product Water Treatment Biz FilONE module
We will always offer the best products and services.
As the FilONE (HMS-Type) module has a hydrodynamic structure, it uniformly distributes the feed water, produced water and
air in the product, and makes it possible to minimize the Dead Zone.
As the FilONE series increased the stability and performance of the product through optimal design, it secured economy and efficiency during system operation, and as environmental materials and components with low corrosiveness are used for the module, it is harmless and very durable. In particular, the special assembly method of Huvis eliminates the risk of water leaks.
Item | Module | Head cover |
Clamp | Module Clamp |
Coupling Set |
Blind | Saddle | Air Blind |
---|---|---|---|---|---|---|---|---|
Quantity | 1 | 1 | 2 | 2 | 3 | 3 | 2 | 1 |
3 High Performance | Advantages of the water treatment module of Huvis Sichuan |
“Its low fracture ratio due to the high strength of the separation membrane helps to prevent secondary pollution” - It can stably provide feed water by preventing the pollution of the produced water due to the fracture of the separation membrane. |
---|---|---|
Efficiency of Filtration | ||
CEB1 & CIP2 Recovery Rate | “It uses a hydrophilic separation membrane, which gives it excellent fouling resistance that makes stable operation possible in the long run” - As it uses less chemicals than competitive products, and has little chemical-cleaning wastewater, it is economical. |
|
Durability of Module | ||
3 Reduction Effect | “As it has excellent chemical resistance, it can be applied to various kinds of raw water, and has a wide range of chemical cleaning” - It is excellent in high-concentration wastewater treatment / reuse, and the module has a long life. |
|
Resistance of Filtration | ||
TMP (Trans Membrane Pressure) | “Its module has a low working pressure that reduces power costs and greatly saves energy” - It saves 15 ~ 30% more energy than its domestic / foreign module products. |
|
Energy Consumption |
HMO Module Specifications | 1017 (50) | 1017 (80) | 1024 (50) | 1024 (80) | ||
---|---|---|---|---|---|---|
Module Pipe Size | Feed Water | 50A | 80A | 50A | 80A | |
Condensed Water | 50A | 80A | 50A | 80A | ||
Filtrated Water | 50A | 80A | 50A | 80A | ||
Length | L | mm | 1825 | 1880 | 2325 | 2380 |
L1 | 1630 | 1670 | 2130 | 2170 | ||
L2 | 60 | 77 | 60 | 77 | ||
L3 | 135 | 133 | 135 | 133 | ||
L4 | 1515 | 2015 | ||||
L5 | 180 | |||||
Diameter of Module’s Inside and Outside | OD / ID | mm | 235 / 215 | |||
Weight | Dry | Kg | 30 | 35 | ||
Add Protection Liquid | Kg | 70 | 100 |
Classification | Huvis Sichuan™ HMO Ultrafiltration Membrane Module | |
---|---|---|
HMO-1017 (50A, 80A) | HMO-1024 (50A, 80A) | |
Flux Range @25℃ | 40 ~ 120 LMH | |
Operation Range | 2.0 ~ 6.0 Ton/H | 2.8 ~ 8.4 Ton/H |
PH | 2 ~ 11 | |
Temperature | 1 ~ 40℃ | |
Maximum Applied Feed Pressure (@20℃) | ≤ 3.0 bar | |
Maximum Trans Membrane Pressure | ≤ 2.0 bar | |
Sodium Hypochlorite (Max) | ≤ 3,000 ppm | |
Sodium Hypochlorite | ≤ 30 ppm | |
TSS (Max) | ≤ 100 ppm | |
Feed Turbidity (Max) | ≤ 300 NTU | |
Operation Type | Full Flow Membrane / Cross Flow Membrane | |
Water Production Turbidity | ≤ 0.1 NTU | |
SDI | ≤ 3 |
Classification | Huvis Sichuan™ Ultrafiltration Membrane Module | |
---|---|---|
1017 (50A, 80A) | 1024 (50A, 80A) | |
Filtration Type | External Pressure | |
Structure | Asymmetric | |
Material | PES | |
Membrane Area | 52 m2 | 72 m2 |
Seal Packing Material | Polyurethane | |
Surface Membrane | ABS | |
Remove Virus Rate | 6.5 Log | |
Fiber / Module | 7,200 ~ 7,800 | 7,300 ~ 7,900 |
Packaging Density | 40 ~ 50% |
HMI Module Specifications | HS-50 | HS-60 | ||
---|---|---|---|---|
Module Pipe Size | Feed Water | 50A | ||
Condensed Water | 50A | |||
Filtrated Water | 50A | |||
Length | L | mm | 1742 | 1922 |
L1 | 1630 | 1810 | ||
L2 | 40 | |||
L3 | 72 | |||
L4 | 1528 | 1708 | ||
L5 | 200 | |||
Surface Membrane | O/D | mm | 262 | |
I/D | 248 | |||
Weight | Dry | Kg | 48 | 66 |
Add Protection Liquid | Kg | 95 | 123 |
Classification | Huvis Sichuan™ HMI Ultrafiltration Membrane Module | |
---|---|---|
HS-50 | HS-60 | |
Flux Range @25℃ | 40 ~ 100 LMH | |
Operation Range | 2.1 ~ 5.3 Ton/H | 2.4 ~ 6.0 Ton/H |
PH | 2 ~ 11 | |
Temperature | 1 ~ 40℃ | |
Maximum Applied Feed Pressure (@20℃) | ≤ 3.0 bar | |
Maximum Trans Membrane Pressure | ≤ 2.0 bar | |
Sodium Hypochlorite (Max) | ≤ 1,000 ppm | |
Sodium Hypochlorite (Maintain Cleanliness) | ≤ 30 ppm | |
TSS (Max) | ≤ 100 ppm | |
Feed Turbidity (Max) | ≤ 300 NTU | |
Operation Type | Full Flow Membrane / Cross Flow Membrane | |
Filtrated Water Turbidity | ≤ 0.1 NTU | |
SDI | ≤ 3 |
Classification | Huvis Sichuan™ Ultrafiltration Membrane Module | |
---|---|---|
HS-50 | HS-60 | |
Filtration Type | Internal Pressure | |
Structure | Asymmetric | |
Material | PES | |
Membrane Area | 50 m2 | 60 m2 |
Seal Packing Material | Epoxy Resin | |
Surface Membrane | ABS | |
Remove Bacteria Rate (Virus) | 4.5 Log (MS2 Standard) | |
Fiber / Module | 7,200 ~ 7,800 | 7,300 ~ 7,900 |
Packaging Density | 40 ~ 50% |